Use the right snatch block
You can do this by setting up an anchor point and pulling your snatch block to it on a slightly inclined, flat surface and letting the vehicle roll. Whether you’re recovering another vehicle or pulling a stump from the ground, knowing the proper winching techniques can help keep you and others around you safe. And perhaps the most important part of the snatch block, regardless of the situation, is what you do before you pull. Apply your knowledge of snatch block and the basic fundamentals you’ve practiced and adjust your techniques to your unique situation. Always take your time to assess your situation and plan your pull carefully. Always take your time when using a winch. You and only you should handle the wire rope and operate the remote control switch. Think safety at all times.It is extremely important to wear protective gloves while operating the winch or handling the wire rope.Because it is designed to stretch, it stores energy and could react like a rubber band should your rigging fail. A snatch block anchor is critical to winching operations. An anchor must be strong enough to hold while winching. This allows the wire rope to wind tightly and evenly onto the spooling drum. An anchor point as far away as possible will provide the winch with its greatest pulling power.Be sure that snatch block in the immediate vicinity surrounding the winching operation is completely aware of your intentions before you pull. This results in the snatch block. The angle of the snatch block also has to be calculated and added to the RR. Anything over that angle and the would be taken as equal to the Vehicle Weight.Vehicle weight divided by ground condition . To calculate the gradient resistance take the weight of the vehicle multiplied by the slope. It is wise to include a safety factor at the end. This is one quarter of the total added to the total.
